The FLUXUS G721 is a technological breakthrough in the ultrasonic clamp-on volume and mass flow measurement of gases.
With its new hardware design and improved, powerful digital signal processing it surpasses any other non-intrusive ultrasonic flowmeter in terms of
accuracy, reliability and versatility.
Highly sophisticated signal filters, faster than ever processing capacities and substantially improved measurement algorithms make the FLUXUS G721 gas flow meter
a state-of-the-art measuring solution even for the most challenging applications.
The meter adapts itself automatically to the respective measurement conditions and compensates for perturbations such as beam dispersal and
structure-borne noise, allowing for even more precise and reliable measurements. Extreme fast measurement cycles allow for precise real time monitoring of highly dynamic processes.
The FLUXUS G721 offers non-intrusive flow measurement of virtually any kind of gaseous media, independent of the pipe size, material and with no upper pressurisation limit. Due to its advanced technology, the measurement is unaffected by gas wetness and distinguishes itself by its unrivalled turndown ratio: Even low flows down to only a few cubic meters per hour can be recorded accurately.
As the flowmeter of choice for a very wide range of applications in virtually any industrial sector, the FLUXUS G721 is available with two different enclosure types: aluminium housing for standard applications and stainless steel housing for operation in highly corrosive environments. Both can be used in explosion hazard areas (ATEX, IECEX Zone 2, FM Class I, Div. 2, EAC TR TS, Inmetro).
Further value is added by the meters advanced selfmonitoring capabilities and the possibility of event driven data recording. The flow meter is permanently controlling the quality of the measurement. Such values, but also every other measurement data as well as externally fed in data, e.g. pressure and temperatues, can be chosen to trigger free defined meter functionalities. For instance, in case the quality of the measurement is falling below a predefined value, a temporary recording of high resolution measurement data can automatically be started. Such free configurable event based trigger functionality is not only perfectly suited for measurement diagnostics, but even more for the accurate monitoring of processes and especially the supervision and control of critical operations.
Flow channels: 1 or 2
Operating temperature of the
transmitter: -40°C ... 60°C
Degree of protection: Transmitter: IP66, Transducers: up to IP68
Available Hazardous Area
Classification (optional): ATEX and IECEx Zone 2, FM Class I, Div. 2,
Inmetro, EAC TR-TS
Outputs: current (0/4 mA ... 20 mA), voltage, frequency,
pulse, alarm Ethernet and USB ports for
communication and parameterisation