FLUXUS F501 - Designed for the needs of the Water Utilities sector

Applications

  • Flow measurement at water and wastewater lines - including buried lines
  • Highly Hygienic measurement technology for drinking water applications
  • Leakage detection at water lines
  • Volumetric flow measurement at Hydro Power Plants
  • Flow measurement of water and water mixtures within processing and manufacturing industries
Download
FLUXUS F501
Technical Datasheet
tsfluxus_f501 - en-gb.pdf
Adobe Acrobat Document 289.7 KB

The FLUXUS F501 is FLEXIM's solution for many flow metering applications found in the water and wastewater sector and adjacent industries.

The FLUXUS F501 offers a precise bi-directional flow measurement over a wide turndown ratio - not only at high, but especially at low flow velocities. Due to its matched and paired transducers, it also guarantees a superior zero stability.

Whereas the standard FLUXUS F501 comes with water-tight IP67 transducers, the product variant FLUXUS F501IP is equipped with a set of IP68 transducers.
The F501IP is thus the ideal solution for 
subsurface installations. With the transducers residing inside the stainless steel VARIOFIX C fixture,  the measurement system is optimally protected  and a long lifetime ensured.

As of its high repeatability, the FLUXUS F501 also offers the possibility for leak detection. Especially at night, when temperatures are more even and only low flow velocities are common in drinking water lines, leakages can clearly be identified and such reading transferred to a process control system.

The ideal retrofit solution for water pipes

As a non-invasive clamp on flow meter, the FLUXUS F501 is the ideal solution for retrofitting in existing networks. As there is no need for interruption of supply lines and costly shaft constructions, it is thus also the much more cost effective solution in comparison to conventional metering technologies such as magnetive inductive meters.
Due to the non-invasive technology, no cutting or welding work is needed to mount the transducers on the pipe. During installation, the flow meter's user interface is automatically adapted to the connected transducers and no zeroing is necessary. Water is already pre-selected as medium and it's physical properties are stored in the flowmeter's memory.

In most cases only the pipe's outer diameter and wall thickness as well as the water temperature has to be entered in order to start the measurement. The commissioning work is thus reduced to a minimum. On request, the instrument can even be pre-configured at the factory.

 


Advantages

  • Precise bi-directional, highly dynamic flow measurement
  • Water-tight transducers (IP67) for outside use
  • Virtually maintenance free - permanent coupling pads instead of frequent regreasing
  • Simple retrofitting in existing networks and systems - no need for pipe work
  • User-friendly menu navigation - the firmware is specifically adapted to the needs of the water industry
  • For nominal pipe diameters of 10mm up to 2500mm - highly cost effective
  • Superior pipeline leak detection - high repeatability of accurate measurement readings
  • Digital Signal Processing ensuring stable and reliable results even under difficult measurement conditions
  • High measuring accuracy, even at low flow velocities due to matched transducers

Technical

Flow channels:                               1

Operating temperature of the

transmitter:                                     -10°C ... 60°C

Degree of protection:                     Transmitter:IP66/Transducer: IP67/IP68

Outputs:                                         1x (2x) current, 2x binary

Media temperature:                       -40°C ... 100°C

Pipe diameter range:                     10 mm ... 2500 mm

Flow velocity range:                       0,01 ... 25 m/s 

Measurement accuracy:                 ± 2 % of reading, ±0.01 m/s for F501±

                                                       1,5 % of reading, ±0.01 m/s for F501IP

Repeatability:                                 ± 0,25% of reading, ±0,01 m/s

Additional NotesAvailable as 240V or 24V (DC) power supply version